Continue reading →

Continue reading →

How to Maintain a Barreto Trencher Chain in A Good Condition

For the Barreto trencher to deliver a constant output, then you have no choice but to maintain it in excellent condition. But this is something that some of the operators are unable to do. What most of them don’t know is that poor maintenance may cost hugely in the long run. Among the most critical Barreto trencher parts is the chain. It is the part that carries most of the cutting parts, and that’s why it is crucial to the performance of the machine. But how can you maintain it? Well, here are ways that you can keep it in good condition:

Greasing regularly

One of the best maintenance practices is greasing the moving parts of the chain. Note that there are plenty of bearings and sprockets along the chain. These are moving parts, and the only way that you can ensure their efficiency is by regular greasing. Developing a schedule on how you will have the chain parts lubricated in one of the best ways to go about it. But this should be determined by how frequent the machine is working and the kind condition it is working in. If you are working in hot conditions and for long hours, then you should have the chain greased regularly.

Sharpening the Teeth

Trencher’s teeth are definitely the most important Barreto trencher parts(click here to know more about it) when it comes to determining the performance of the machine. You may have the best chain and the rest of the parts, but if your teeth are in terrible condition, then you will never get the best out of your machine. If you have the best quality teeth, then sharpening the tip would be the only way to ensure their continued performance. But the frequency of sharpening is dependent on the type of task that the machine is handling and the material used on the tip. If you are trenching on tough conditions, then ensure that you have teeth regularly sharpened to maintain peak performance.

Replace when Necessary

Repairing Barreto trencher parts may not offer the best solution as far as the performance of the trencher is concerned. For instance, you could have sharpened the teeth to point where the tip is almost gone. If that’s the case, the only way that you can maintain the performance of the trencher is by replacing such teeth. Other parts of the chain such as the bearing and sprockets should also be replaced if they are beyond repair.

Tips To Maintain Fecon Mulcher Parts

For your Fecon mulching machine to operate optimally, then you need to consider the condition of the wear parts. But some operator rarely takes this into caution and in most cases; newly bought machines are the most neglected.  What operators fail to understand is that the quality or condition of the wear parts is crucial to the performance and the lifespan of the machine. But there are numerous ways that you can go about it, but you need to have the right tips to ensure that you are doing it right. Here are the tips that can help you get the best out of you:

Keep the Clean

Keeping wear parts clean is a rule of thumb. If you want to keep the Fecon parts in good shape and for longer; then, you need to have then cleaned regularly. This is especially important to the mulcher teeth which are exposed to dirty conditions including debris and dust particles. The parts should be checked properly before and after use. Some of the things like sticking branches and debris during operation are likely to consume extra horsepower thus lowering the efficiency and the performance of the machine.

Generous Greasing

Most of the active Fecon parts are in constant motions, and thus a lot of wear is generated out of the friction. Therefore greasing or lubrication is a key element in the maintenance of mulching machines. Some of the key parts that you need to consider carefully are the rotating parts such as the head attachment, bearing and the rotor amongst others. Failure to greasing results in wear and tear due to friction and that will have a negative impact on the cost of maintenance. Ensure that you have greased the bearing every 8 hours of work if the machine is working continuously. Apart from the rotor, the belt tensioners should also be lubricated and any other movable parts.

Proper Operation

Avoid exposing your Fecon mulcher to conditions that are beyond its ability. It is important to check features such as horsepower to ensure that the machine can handle the job. Note that how the Fecon forestry mulcher is used will definitely affect the lifespan and the cost of the maintenance. Choose the ground conditions carefully and also ensure that you have scanned it carefully. For example, avoid working in grounds littered with debris such as bottles, wire, metal objects and huge rocks.

Tips for Extending the Useful life of Milling Teeth

Road milling is undoubtedly one of the toughest jobs in the construction industry. Although the type of surfaces matters, there is nothing like soft milling- everything about road milling is hard. If you ask most of the contractors, a big chunk of the budget goes to the maintenance of the drilling machines. It could be anything from replacements or refurbishing the already worn out parts. Road milling teeth are some of the most affected parts of any road milling machine. But do you know that you reduce your maintenance cost by extending the useful life of your milling machine? Well, this is true. Here are ways that you can extend you milling teeth lifespan:

Get High-Quality Teeth

For your teeth to serve you for longer without the need for frequent replacement or repair, then go for quality teeth. But with so many brands of the market, it can be a little bit tricky to get quality teeth, especially for the newbies. The quality of asphalt milling machine teeth should be checked from the type of material used in manufacturing them. There are numerous types of materials for manufacturing, but Tungsten Carbide is the most recommended material. The material offers excellent qualities such as extreme hardness, high wear resistance, and high resistance to impact. With these features, your milling teeth will work efficiently on extreme demanding conditions and at the same time last for longer.

Select Milling Tasks Carefully

One of the primary reasons why most contractors are struggling with the high cost of repairs and replacements is misuse of milling machines. How well do you use your machine? In some cases, road milling teeth are exposed to very harsh condition thus accelerating the rate of wear and tear. So, you need to ensure that you have selected the right job for the machine. If the milling teeth is best designed for asphalt surfaces, then don’t take to concrete floors since you will reduce their useful life.

Proper Maintenance

Maintenance is crucial for any machine. For the asphalt milling teeth or any other type of milling machine, it is important to have the cutting parts maintained adequately. For instance, if you regularly maintain the equipment, you will be able to identify faults early and make necessary changes to improve. For instance, you might identify a small crack in the teeth that can rectify to increase teeth lifespan. So make sure that you have done proper maintenance regularly.